MJShasko wrote:Here's a 2D mapping option that has worked well for me. Sorry to have to include a map snippet ... it shouldn't be of help to 99% of you anyways
Requires:
5mm graph paper and a 9/16" washer or
1/4 inch graph paper and a "dime"
millimetre ruler
....
Thanks MJShasko!
I am gearing up to map my Orange (first Revomaze for me).
I plan on keeping everyone posted on my mapping progress in this thread and I will share my final map in the Orange Open section (someday, hopefully)..
I went to the hardware store today to buy a 9/16" washer as suggested above. For anyone else trying to use this method, you need to find a washer that has an Outside Diameter of 9/16". If you buy a washer labeled 9/16" you are getting a washer that has a hole 9/16" across and it is going to be WAY TOO BIG.
Take your ruler with you to the hardware store and make sure the washer is 9/16" across.
-Jeremy