Mini Revomaze Keyring Project
Re: Mini Revomaze Keyring Project
If they are that small the walls may be super delicate and the machine would need a much smaller and accurate drill bit. Also the pins would need to be strong enough to not warp from the force because a smaller puzzle at the same size maze means smaller paths which means smaller pins.
-
TheJuggler
- Posts: 838
- Joined: Wed Jul 14, 2010 5:06 pm
- Location: California, USA
- Contact:
Re: Mini Revomaze Keyring Project
Not to mention smaller springs ... and those things can't be manufactured in house, and are incredibly expensive, unless buying in significant bulk.
The comment on drill bit size and accuracy is very true though. As you scale down there's less room for error, and in fact the cost of a machine will increase, not decrease.
The comment on drill bit size and accuracy is very true though. As you scale down there's less room for error, and in fact the cost of a machine will increase, not decrease.
Re: Mini Revomaze Keyring Project
Makes me think that this may be an example of less is more. Hopefully we'll have more info about the mini in the near future.
Peter
Gunmetal Unopened
Aqua,Turquoise Opened
Blue, Green, Bronze, Silver, Gold, Purple Opened
Black V1 + V2, Orange, Red, Titanium, Lime Opened
HandMade Prototypes too scary to reassemble
Gold CE set in Clear Sleeves
Gunmetal Unopened
Aqua,Turquoise Opened
Blue, Green, Bronze, Silver, Gold, Purple Opened
Black V1 + V2, Orange, Red, Titanium, Lime Opened
HandMade Prototypes too scary to reassemble
Gold CE set in Clear Sleeves
-
TheJuggler
- Posts: 838
- Joined: Wed Jul 14, 2010 5:06 pm
- Location: California, USA
- Contact:
Re: Mini Revomaze Keyring Project
To be brutally honest, I actually hope not. Revomaze has a number of outstanding commitments that it needs to deliver on before considering yet more new projects.pcad wrote:Makes me think that this may be an example of less is more. Hopefully we'll have more info about the mini in the near future.
Re: Mini Revomaze Keyring Project
I agree. I meant soon in a relative sort of way.
Peter
Gunmetal Unopened
Aqua,Turquoise Opened
Blue, Green, Bronze, Silver, Gold, Purple Opened
Black V1 + V2, Orange, Red, Titanium, Lime Opened
HandMade Prototypes too scary to reassemble
Gold CE set in Clear Sleeves
Gunmetal Unopened
Aqua,Turquoise Opened
Blue, Green, Bronze, Silver, Gold, Purple Opened
Black V1 + V2, Orange, Red, Titanium, Lime Opened
HandMade Prototypes too scary to reassemble
Gold CE set in Clear Sleeves
Re: Mini Revomaze Keyring Project
About spring/pin size....
Nobody says a mini revo has to be a perfect downscale thing, it may be less complex.
Nobody says a mini revo has to be a perfect downscale thing, it may be less complex.
BUGRBRAGAUTIPUORLMRBL1BL2GMCUAQINMTTQSAGY ☿
waiting: lite
waiting: lite
Re: Mini Revomaze Keyring Project
Like NASCAR of the Revo-world! OH LOOK A LEFT TURN! YEEEHAWWW!
R2 Voyager 073, O: Mercury
R1, O: BU, GR, BR, AG, AU, Series Code, PU,
R1 Obs, O: BU Obs, BU Obs Pro, GR Obs, BL Obs V1, BL Obs V2, R Obs,
R1 Limited, O: BL, HM, R, OR, LM, TI, GM, Mini, CU
Paid: Eris, Makemake, Venus, Earth
R1, O: BU, GR, BR, AG, AU, Series Code, PU,
R1 Obs, O: BU Obs, BU Obs Pro, GR Obs, BL Obs V1, BL Obs V2, R Obs,
R1 Limited, O: BL, HM, R, OR, LM, TI, GM, Mini, CU
Paid: Eris, Makemake, Venus, Earth
Re: Mini Revomaze Keyring Project
We dont know anything about the maze design yet. Allard has seen a tiny Revomaze made by Chris which is a fully functioning blue design. As for the pin, Mark found a way to make a 1.5 mm wide pin work with a 3mm spring. If this is a 3/10 scale maze, the pin width will probably be 1mm or less in diameter.
Just speculation until they tell us more.
Just speculation until they tell us more.
Peter
Gunmetal Unopened
Aqua,Turquoise Opened
Blue, Green, Bronze, Silver, Gold, Purple Opened
Black V1 + V2, Orange, Red, Titanium, Lime Opened
HandMade Prototypes too scary to reassemble
Gold CE set in Clear Sleeves
Gunmetal Unopened
Aqua,Turquoise Opened
Blue, Green, Bronze, Silver, Gold, Purple Opened
Black V1 + V2, Orange, Red, Titanium, Lime Opened
HandMade Prototypes too scary to reassemble
Gold CE set in Clear Sleeves
Re: Mini Revomaze Keyring Project
!!!! WOW! Well back to revomaze being a revomaze! 
R2 Voyager 073, O: Mercury
R1, O: BU, GR, BR, AG, AU, Series Code, PU,
R1 Obs, O: BU Obs, BU Obs Pro, GR Obs, BL Obs V1, BL Obs V2, R Obs,
R1 Limited, O: BL, HM, R, OR, LM, TI, GM, Mini, CU
Paid: Eris, Makemake, Venus, Earth
R1, O: BU, GR, BR, AG, AU, Series Code, PU,
R1 Obs, O: BU Obs, BU Obs Pro, GR Obs, BL Obs V1, BL Obs V2, R Obs,
R1 Limited, O: BL, HM, R, OR, LM, TI, GM, Mini, CU
Paid: Eris, Makemake, Venus, Earth
Re: Mini Revomaze Keyring Project
Ordered!
Chyron wrote:Sometimes I get the feeling that someone goes around hiding old Puzzles in RevoHQ.