Page 1 of 1

3D Printed Mini Stand

Posted: Fri Apr 17, 2020 12:32 pm
by chris_linnick
Does anyone have files to print a 3D stand for the mini revo? I know there’s a full-size one on thingiverse. But before I modify that design just reaching out to see if anyone has done this already.

Thanks,

Re: 3D Printed Mini Stand

Posted: Sun May 17, 2020 10:38 am
by Buschfunch
If you want something like the one I made:
https://www.thingiverse.com/thing:3837121

I should be able to adjust the dimensions to fit the mini.

Just write the dimensions I would need to make the hole in the stand (nut diameter and length + first part of the cylinder)

Re: 3D Printed Mini Stand

Posted: Mon May 18, 2020 1:35 am
by 03SVTCobra
Buschfunch wrote: Sun May 17, 2020 10:38 am If you want something like the one I made:
https://www.thingiverse.com/thing:3837121

I should be able to adjust the dimensions to fit the mini.

Just write the dimensions I would need to make the hole in the stand (nut diameter and length + first part of the cylinder)
These are sweet i need to figure out why the 3d printer at work isnt reading my files and print some!