3D Printed Mini Stand

For all general forum discussions.
Post Reply
chris_linnick
Posts: 161
Joined: Thu Apr 02, 2020 7:19 pm

3D Printed Mini Stand

Post by chris_linnick »

Does anyone have files to print a 3D stand for the mini revo? I know there’s a full-size one on thingiverse. But before I modify that design just reaching out to see if anyone has done this already.

Thanks,
Looking to purchase:
Limited/Special Edition (Extreme/Metal --> Black and Black merc)
PM or email (preferred): linnick.christopher@gmail.com
Buschfunch
Posts: 57
Joined: Sat Aug 06, 2011 12:44 pm
Location: Denmark

Re: 3D Printed Mini Stand

Post by Buschfunch »

If you want something like the one I made:
https://www.thingiverse.com/thing:3837121

I should be able to adjust the dimensions to fit the mini.

Just write the dimensions I would need to make the hole in the stand (nut diameter and length + first part of the cylinder)
User avatar
03SVTCobra
Posts: 1530
Joined: Wed Jun 09, 2010 11:46 pm
Location: NY

Re: 3D Printed Mini Stand

Post by 03SVTCobra »

Buschfunch wrote: Sun May 17, 2020 10:38 am If you want something like the one I made:
https://www.thingiverse.com/thing:3837121

I should be able to adjust the dimensions to fit the mini.

Just write the dimensions I would need to make the hole in the stand (nut diameter and length + first part of the cylinder)
These are sweet i need to figure out why the 3d printer at work isnt reading my files and print some!
BU00060 :) GR00060 :) BR00060 :) AG00060 :) AU00060 :)
R00060 :) OR00060 :) LM00060 :) TI00030 :) CU00060 :) AQ00060 :) IN00060 :)
MT00060 :) TQ00060 :)GM :) HM :)
Blue Obs :) Green Obs :) Black Obs :) Black Obs V2 :) Red Obs :|
Post Reply

Return to “General”