Create your own clear sleeve

For all general forum discussions.
Post Reply
dasrevo

Create your own clear sleeve

Post by dasrevo »

So, I really wanted to show my friends how the Revomaze works and give a look in the movements inside.
So, I bought a 1m pmma pipe (Plexiglass) with an inner diameter of 24 and outer of 30 mm for only 6 euros, drilled a 3mm hole for the pin and taped a piece of plastic on the pipe that works as the spring mechanism and I must say: it works perfectly!! For the plastic springy part I used a piece from a cdrom box that is of course very hard but has the perfect springiness.

So for all you out there: creating your own clearsleeve is really easy, took me one hour.
Post Reply

Return to “General”