I'm going to try to make one, the acrylic should be here friday...
Unfortunately, the inner diameter of the shell is approx. 15/16", right between .875" and 1" (size options). Foolishly, I ordered the smaller one, so I'll have some difficult sanding/routing/cutting/buffing to do
The thickness of the acrylic is .125", so ill have to be halving that to merely .0625". But don't worry, I had to order 6 feet of it (only around $7, but shipping was $8)
RevoMaze Series I SSE Clear!
Re: an idea - a transparent sleeve!
BU01097 - open 3/24/2011 GR00140 - open 11/25/2010 BR00042 - open 12/2/2010
BL obs - open 1/6/2011 AG00326 - don't come any closer or I'll jump! AUXXX86 - on hold
BL obs - open 1/6/2011 AG00326 - don't come any closer or I'll jump! AUXXX86 - on hold
Re: an idea - a transparent sleeve!
I mentioned this to Chris a while ago as a potential addition to the Obsession range, although I suggested the sleeve should be frosted, so along with the White shaft the puzzler doesn't get a complete view of what is going on inside, just a tantalising glimpse maybe.
If it were ever to come to fruition a name I suggested was the "Revo Ice", what do you think?
Another idea was the mini/pocket/ travel version if this were possible.
There are many ways the Revo can be made as a different style of puzzle, maybe we could set up a section on here for brainstorming/development suggestions for both the puzzles, stands and cases etc, not that Chris will ever get the time to take the ideas up as he is so busy,...but you never know.
If it were ever to come to fruition a name I suggested was the "Revo Ice", what do you think?
Another idea was the mini/pocket/ travel version if this were possible.
There are many ways the Revo can be made as a different style of puzzle, maybe we could set up a section on here for brainstorming/development suggestions for both the puzzles, stands and cases etc, not that Chris will ever get the time to take the ideas up as he is so busy,...but you never know.
Ex & Ltd
OPEN==
OPEN==
OPEN==
OPEN== v2
OPEN== v1 .....Just!!!
OPEN==
OPEN==
=[iiii]=
OPEN==
Obs
TEST==
OPEN==
OPEN==
OPEN==
OPEN==
OPEN==
OPEN==
OPEN==
OPEN== v2
OPEN== v1 .....Just!!!
OPEN==
OPEN==
=[iiii]=
OPEN==
Obs
TEST==
OPEN==
OPEN==
OPEN==
OPEN==
Re: an idea - a transparent sleeve!
"This has all happened before, and it will happen again"
http://www.revomaze.co.uk/phpBB3/viewto ... 955#p13955
http://www.revomaze.co.uk/phpBB3/viewto ... 955#p13955
Re: an idea - a transparent sleeve!
Yeah I know about that thread, it looks at a lot of Revo related material but not specifically at the Revo and it's potential incarnations.
Ex & Ltd
OPEN==
OPEN==
OPEN==
OPEN== v2
OPEN== v1 .....Just!!!
OPEN==
OPEN==
=[iiii]=
OPEN==
Obs
TEST==
OPEN==
OPEN==
OPEN==
OPEN==
OPEN==
OPEN==
OPEN==
OPEN== v2
OPEN== v1 .....Just!!!
OPEN==
OPEN==
=[iiii]=
OPEN==
Obs
TEST==
OPEN==
OPEN==
OPEN==
OPEN==
Re: an idea - a transparent sleeve!
The revoclear is a success! Except it doesn't look exactly like you guys are picturing it... Its more of a ring of plastic than an entire case.
It's currently stuck on my bronze (I'll have to solve it to get it off ) so I'll post it in bronze open. Once I get the ring off, I'll post it here. Then I'll put it on my green (don't worry, I can get it off that one...) and post it in the green open forum.
Also the ring is a little icy instead of clear... maybe I'll polish it later.
It's currently stuck on my bronze (I'll have to solve it to get it off ) so I'll post it in bronze open. Once I get the ring off, I'll post it here. Then I'll put it on my green (don't worry, I can get it off that one...) and post it in the green open forum.
Also the ring is a little icy instead of clear... maybe I'll polish it later.
BU01097 - open 3/24/2011 GR00140 - open 11/25/2010 BR00042 - open 12/2/2010
BL obs - open 1/6/2011 AG00326 - don't come any closer or I'll jump! AUXXX86 - on hold
BL obs - open 1/6/2011 AG00326 - don't come any closer or I'll jump! AUXXX86 - on hold
Re: an idea - a transparent sleeve!
Nice! Can you post a censored picture? A word of warning though...DO NOT PUT THIS ON YOUR SILVER CORE!!, especially if it's designed off of the bronze sleeve. That being said, the silver core should never be placed within any other sleeve. The time lock will not function properly...and other, more serious reasons.
Re: an idea - a transparent sleeve!
tada!
Last edited by Ginger on Sat Jan 08, 2011 6:56 am, edited 1 time in total.
BU01097 - open 3/24/2011 GR00140 - open 11/25/2010 BR00042 - open 12/2/2010
BL obs - open 1/6/2011 AG00326 - don't come any closer or I'll jump! AUXXX86 - on hold
BL obs - open 1/6/2011 AG00326 - don't come any closer or I'll jump! AUXXX86 - on hold
Re: an idea - a transparent sleeve!
Yellow part contains a spring and the pin*
This doesn't give away anything, does it?
This doesn't give away anything, does it?
BU01097 - open 3/24/2011 GR00140 - open 11/25/2010 BR00042 - open 12/2/2010
BL obs - open 1/6/2011 AG00326 - don't come any closer or I'll jump! AUXXX86 - on hold
BL obs - open 1/6/2011 AG00326 - don't come any closer or I'll jump! AUXXX86 - on hold
- ceagull333
- Posts: 149
- Joined: Sat Dec 26, 2009 4:50 pm
- Location: Seattle, WA USA
Re: an idea - a transparent sleeve!
Here is my attempt. I posted an unedited photo in the Bronze Open.
- Attachments
-
- Edited.jpg (49.88 KiB) Viewed 8280 times
BR110 Open GR296 Open GR Obs Open BU652 Open BLObs Open Black Obs Open AG104 Open Red Obs Open RD46 Open AU46 Open Purple (not right!)HM08LE (sealed)OR46 Open LM113 Open GM Open TI46 Open Aqua,CU on hand Indigo on order