Huston we may have a problem.

General Questions.
Post Reply
Coloradobluesguy
Posts: 128
Joined: Wed Dec 13, 2017 2:04 am
Location: Denver, Colorado

Huston we may have a problem.

Post by Coloradobluesguy »

Maybe it’s part of the puzzle but I fell into what I assume is a trap now the maze is reset and the inner shaft won’t make a full rotation did something break or is it another lever trick to figure out?
AQ-01128-SOLVED
BU-07001-SOLVED
TQ-00223-In Progress
GR-07001-SOLVED
Mint MT-0150-Solved
BR07001-In Progress
Indigo-Ordered/Arrived
Gunmetal-Ordered/Arrived
Copper-Ordered/Arrived
Silver-
Handmade
Lime
Mini
Red-0032
Gold-
Titanium
mereacregrigore18
Posts: 202
Joined: Tue Apr 17, 2018 10:48 am

Re: Huston we may have a problem.

Post by mereacregrigore18 »

It should make a full rotation. :shock:
User avatar
mattangel
Posts: 1575
Joined: Tue Feb 02, 2010 5:20 pm
Location: Washington, DC

Re: Huston we may have a problem.

Post by mattangel »

Try with a BiT more force
User avatar
jimbo
Posts: 75
Joined: Thu Jan 10, 2019 2:05 pm

Re: Huston we may have a problem.

Post by jimbo »

Mine also started doing this too. Like already said a little extra force moves it past that jam point. I hope to open it and remove the debris if that’s what it is.
AQBLGRBR
INQuit
User avatar
doc81
Posts: 318
Joined: Thu Sep 13, 2018 10:18 pm
Location: Nebraska, US

Re: Huston we may have a problem.

Post by doc81 »

I never had this issue but I know some have reported this in the forum on Bronze. It sounds like a bit more force fixes the issue.
SET SERIAL #7021
OPENED: AQUA - BLUE - GREEN - MINT - TITANIUM - BRONZE - MINI
CLOSED: COPPER - GUNMETAL - ORANGE - INDIGO - SILVER - HANDMADE
bob2187
Posts: 4
Joined: Thu Apr 16, 2020 4:20 pm

Re: Huston we may have a problem.

Post by bob2187 »

This just happens to me. I really feel like I’m going to break it if I give it more force. Any ideas?
User avatar
ghxost
Posts: 579
Joined: Sun Dec 30, 2018 8:53 pm

Re: Huston we may have a problem.

Post by ghxost »

If not sending into be fixed is the next step

But the reason behind saying try a little harder is sound logic. There is a good reason it could happen and that would be the only applicable fix I can think of if its fixable by you...
Seeking:
Black extreme (not merc), Red (extreme), Ruby, Peach
Ramisi5, devil isis, devil copernisis (or other harder variants)
User avatar
Aldan
Posts: 328
Joined: Tue May 01, 2018 10:38 am
Location: Vienna, Austria

Re: Huston we may have a problem.

Post by Aldan »

bob2187 wrote: Fri Apr 17, 2020 3:44 am This just happens to me. I really feel like I’m going to break it if I give it more force. Any ideas?
Hi,
another thing you can try is to rotate the core fast left and right so that it hits "the obstacle" with a greater speed. This did the trick for me when I got stuck. After that it didn't get stuck anymore.
Open: BLUE - BRONZE - INDIGO - MINT - COPPER - GUNMETAL - AQUA - GREEN - TITANIUM - ORANGE - SILVER - HANDMADE - MINI - TURQUOISE - LIME - BLACK-ObsV1 - SALMON - RED - GOLD - BLUE_Pro-Obs - GREY - BLACK-ObsV2 - PURPLE - BU00036 - BLACK-MERC - SAPPHIRE - EMERALD - RUBY - PEACH
Brassassin
Posts: 251
Joined: Wed Sep 26, 2018 10:39 am

Re: Huston we may have a problem.

Post by Brassassin »

Aldan wrote: Fri Apr 17, 2020 11:26 am Hi,
another thing you can try is to rotate the core fast left and right so that it hits "the obstacle" with a greater speed. This did the trick for me when I got stuck. After that it didn't get stuck anymore.
Same for me. I was quite excited when I this obstacle. I read some things about it in the progress thread that made me worry not so much about it.
Opened: BU BR TI OR GR IN MT AQ TQ AG
Closed: CU GM LM GY HM
Post Reply

Return to “Bronze General”