REVOMAZE User Group

Hi,

I revceived my Blue V3 yesterday, and finished this morning (yeah, lack of sleep^^)

For now, I do not succed to remove the shaft from the sleeve, but, the both dots are aligned !

I try Rachel's tips, unsuccess for now...

I LOVE this puzzle !!!! need more !!!

Congrats!

Chris has posted a youtube video on how to remove the shaft:

https://www.youtube.com/watch?v=nNQ7F_vDABY&t=3s

Hello,

Thanks, I succeed open it
just a question, to rebuild it. The pin, wiche size is in the maze ? the round one, or the 2 degree flat ?

Thanks

What I would recommend is getting Rachel to grant you request to the open forumn. Theres a PDF on how to reassemble and the orientation of the pins.

I agree. It is wise to wait for access to the open forum, and follow the reassembly instructions. That way you’ll make sure you don’t do it the wrong way. It can really make a difference.
Ask for access, and just admire the core in the meantime.
Be proud of a job well done! Congratulations.

I have solve my v3 blue and was sent a pdf for Reassembly but it does not explain how to put it back into the sleeve

MevvyMev wrote: ↑Tue Aug 04, 2020 2:21 pm I have solve my v3 blue and was sent a pdf for Reassembly but it does not explain how to put it back into the sleeve

You should contact Rachel to get access to the other Blue groups. The blue shouldn't be hard to reassemble. But the V3 is a little bit different due to the V3 design. In your package where the Revo was inside should be a card especially for the V3 version
If you need further assistance you can send me a on

MevvyMev wrote: ↑Tue Aug 04, 2020 2:21 pm I have solve my v3 blue and was sent a pdf for Reassembly but it does not explain how to put it back into the sleeve

There is a video on youtube of chris removing from the sleeve with instructions on how to also re-assemble.